We provide an extensive range of contact lens tinting options, both for regular contact lens wearers and those with prosthetic requirements. Our tinting laboratory is able to match most complex patterns through a number of well developed techniques, as well as being able to provide a

Manufactured from Polyhema (Filcon I 1) material, this spherical lens has a water content of 38% with a UV inhibitor. The lens is available is a range of base curves, from 8.10 to 9.60 (in 0.3 steps) and in one overall diameter of 14.00.

Tints available are Sapphire, Chestnut,

Manufactured from Polyhema (Filcon I 1) material, this spherical lens has a water content of 38% with a UV inhibitor. The lens is available in a range of base curves, from 7.90 to 9.30 (in 0.2 steps), and in three overall diameters of 12.50, 13.00, 13.50.

Tints available are

Manufactured from MMA/VP material, this spherical lens has a high water content of 67%. The lens is available is 2 base curves (8.30 and 8.60) and one overall diameter of 14.00. 

Tints available are Sapphire, Chestnut, Emerald, Aqua and Amber in strengths of 10% and

Manufactured from MMA/VP material, this spherical lens has a very high water content of 73%. The lens is available is 2 base curves (8.40 and 8.80) and one overall diameter of 14.30. 

Tints available are Sapphire, Chestnut, Emerald and Aqua, in strengths of 10% and 20%.

Manufactured from Polyhema (Filcon I 1) material, this toric lens has a water content of 38% with UV inhibitor. The lens is available is a range of base curves, from 8.10 to 9.60 (in 0.3 steps) and in one overall diameter of 14.00 and uses a lenticulated dynamic stabilisation method.

Manufactured from MMA/VP material, this toric lens has a very high water content of 73%. The lens is available is 2 base curves (8.40 and 8.80) and one overall diameter of 14.50 and uses a lenticulated dynamic stabilisation method.

Tints available are Sapphire, Chestnut, Emerald